BQZSV - DAPCO 1-100 PRIMER
- MSDS: BQZSV
- Manufacturer: D AIRCRAFT PRODUCTS CO
- Product Name: DAPCO 1-100 PRIMER
- National Stock Number: 8030-00F027568
Product Identification
Product ID:DAPCO 1-100 PRIMER
MSDS Date:02/01/1989
FSC:8030
NIIN:00F027568
MSDS Number: BQZSV
Responsible Party
ANAHEIM, CA 92807
US
Emergency Phone: 714-632-8444
Info Phone: 714-632-8444
Preparer: N. ZARRABI
Cage: 58093
Contractor
Telephone: 714-632-8444
Cage: 58093
Ingredients
PETROLEUM DISTILLATE, PETROLEUM OIL, BASE OIL
CAS: 8002-05-9
RTECS: SE7175000
Fraction By Weight: <70%
OSHA PEL 5 MG/CUM MIST
ACGIH TLV: 5 MG/CUM MIST
2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: <3%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
PROPRIETARY COMPONENTS
Fraction By Weight: <35%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HEADACHE, DIZZINESS,
NAUSEA, & INCOORDINATION. INGESTION: HARMFUL, VOMITING, NAUSEA,
DIARRHEA, MOUTH, THROAT & STOMACH IRRITATION. SKIN/EYES:
IRRITATION.
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS
First Aid
First Aid:INGESTION: INDUCE VOMITING. SKIN/EYES: FLUSH W/PLENTY OF
WATER. INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION IN
ALL CASES.
Fire Fighting
Flash Point Method:TOC
Flash Point:30F (MEK)
Lower Limits:2% (MEK)
Upper Limits:11% (MEK)
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA COULD BE USED.
Fire Fighting Procedures:EXTREMELY FLAMMABLE. WEAR PROTECTIVE CLOTHING
W/BUILT-IN RESPIRATORY APPARATUS.
Accidental Release
Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN INERT MATERIAL &
PUT IN CONTAINER FOR DISPOSAL. WEAR PROPER CLOTHING. REMOVE ALL
IGNITION SOURCES. INCREASE AREA VENTILATION.
Handling
Handling and Storage Precautions:STORE IN CLOSED CONTAINER UPRIGHT IN
COOL, DRY AREA AT TEMPERATURES BELOW 80F. USE W/ADEQUATE
VENTILATION.
Other Precautions:STABILITY OF PRODUCT IS 6 MONTHS IN CLOSED CONTAINERS
(80F).
Exposure Controls
Respiratory Protection:USE APPROVED NIOSH RESPIRATORY PROTECTION WHEN
TLV IS EXCEEDED
Ventilation:LOCAL EXHAUST OR MECHANICAL (GENERAL) RECOMMENDED
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES OR SPLASH GOGGLES
Other Protective Equipment:RUBBER APRON
Work Hygienic Practices:EXERCISE GOOD INDUSTRIAL HOUSEKEEPING
PRACTICES.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:160F
Vapor Pres:5
Vapor Density:1
Spec Gravity:1.1
Evaporation Rate & Reference:(BU AC = 1): 1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREEN CLEAR LIQUID W/SOLVENT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:ALL IGNITION SOURCES
Hazardous Decomposition Products:CO, CO2 & SILICONE DIOXIDE
Disposal
Waste Disposal Methods:DISPOSE AS FLAMMABLE LIQUID IN ACCORDANCE
W/FEDERAL, STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.